Shopping catastrophe

I went clothes shopping for the first time last weekend and it was an absolute disaster… Everything is far more expensive here than in Canada. I have a gut feeling about how much I’d be willing to pay for something that’s okay (not bad looking, functional, plain, fits well enough or can be easily modified, a good basic piece) vs something that’s perfect (I love it and know I’ll enjoy wearing for years, great style and/or detailing, the perfect fit) and these prices were far, far higher than my range. There’s no way I’m ever going to be able to justify paying more than my perfect piece price for a merely okay item.

I spent 2 hours browsing and getting more and more despondent. The only thing I even liked enough to consider was a t-shirt in a sale rack, but then I saw the price tag: reduced from $45 equivalent to $30 equivalent! I’ve paid $30 for a t-shirt once, but it’s my favourite top and has loads of detailing (fitted bodice, lace, pleats, gathered neckline) that, for me, justified the price. This was just a plain striped t-shirt… Um, no.

I left the shirt on the rack and gave up on the whole clothes shopping idea. On my way out, I stopped at the craft store and bought some beads, and then I went home to cheer myself up by making something…

Making is fun

(Please excuse my translucently pale skin – being sick for 6 months does takes a toll on a girl’s complexion…)

Two bracelets and a necklace for under $2 – now that’s my kind of shopping! And because I chose all the supplies myself, I could make sure that the necklace is subtle and will go with all my pink and purple tops, and that the bracelets are bolder and will look perfect next to indigo denim. Being crafty is so much more fun than buying mass-produced, over-priced stuff.

When life gives you lemons…

And that gave me the idea to try turning this disappointment into an opportunity: maybe I can make my own clothes in future..? I can take the time that I used to spend wandering malls looking for the elusive piece that has a June-approved style, colour, fit, and price, and use it to learn to stitch garments that I’m guaranteed to like. And so the idea for the Handmade Clothing Project was born.

This will be a huge challenge for me: I’m by no means an expert at sewing, and very inexperienced at making garments from scratch – shortening or modifying existing clothes to fit is more my level at the moment. But I have designed and stitched up bags, a skirt and a t-shirt from scratch in the past, so I think I should be able to do this, if I start with very simple items.

I made this simple skirt in 2008 and it’s still one of my favourites – plus I get the bonus “yay, I made this!” feeling every time I put it on.

Gearing up

I can begin the Handmade Clothing Project with almost no costs: I already have a moderate fabric stash (acquired over the years from remnant bins – I can’t resist a bargain), a wonderful sewing machine, and a small library of books to help me on my way:

• Teach Yourself Visually Sewing (by Debbie Colgrove), a really helpful reference for all the basics of using a sewing machine.
• Encyclopedia of Sewing Machine Techniques (by Nancy Bednar and JoAnn Pugh-Gannon), for more advanced finishing and embellishment techniques (if I ever get to that stage)
• Design-It-Yourself Clothes: Patternmaking Simplified (by Cal Patch), which should help me to draft patterns for clothing that will actually fit me (what a novelty that would be!)

Now all I need is to buy a voltage converter so I can plug my 110V sewing machine into a 240V socket, and I’ll be ready to go! This will obviously be a time-consuming process for me, and I’m still busy trying to get my business back up to speed, so don’t expect new clothing posts every week. But I will share my Handmade Clothing Project successes (and failures) here as they occur – maybe it’ll inspire you to try making clothing too.

Do you make any of your own clothes, or have you ever considered trying it? If so, feel free to join in with the Handmade Clothing Project. (You can still buy clothes too – this isn’t a hardcore “I will never buy clothing again” pledge!) There are no time limits or deadlines, and the only Clothing Project rules are to make stuff you can wear and have fun with it. Crocheting and knitting clothes counts too – you don’t have to sew. Just think how good it’ll feel every time you put on a handmade item – I’m pretty sure you won’t ever get that feeling from anything you bought at the mall…

Who’s with me?

My sister’s getting married next week and I, being the maid of honour, need to have pretty shoes for the occasion. This is a huge problem for me; I’m not a girly shoe kind of girl, and I’ll go for comfort over style any day: heels hurt my feet, pointed toes hurt my feet, unpadded footbeds hurt my feet… However, I’m not stupid, and I don’t think running shoes would be the right look for this occasion! I thought silver would be best with my purple maid of honour dress, but all the silver shoes I saw looked totally tacky or ridiculously expensive. After a marathon 2.5 hour shopping trip covering 7 shoe shops, there was only one pair that looked nice (i.e. not flip flops), were fairly comfortable (i.e. standing in them for 2 seconds didn’t make me say “ouch!”), and reasonably priced. So we went back to the first store (of course that’s where they were!) to buy them.

But. Slight problem: on closer inspection, the beading on the shoes was quite nice, apart from a hideous misshapen lump in the middle of each band, surrounded by a border of tacky-as-anything gold seed beads. Why would they do this?! I despaired for a moment and then remembered that I’m crafty and can totally fix stuff like this. I bought the shoes.

Before. Hideosity.

The beads were stitched on with invisible nylon thread, and the fabric (and hence the threads) were all glued down to the layer below, so I could snip the threads on the offending beads without all the other beads falling off.

Offending beads removed.

I wanted to replace the focal bead with something that would tie it more closely to my purple dress. I found some flat oval cats eye beads that are subtly purple, without looking out of place on the shoe (some of the existing beads are pinkish so the tones match). I couldn’t glue the focal beads to the shoe because the surface was too uneven and the beads were too slippery, so I used some invisible nylon beading thread to go through the focal bead and through an existing bead on each side to lock it in place. A little superglue on the knot to stop it from coming undone when I snipped off the ends of the thread, and the focal beads were secured.

Focal beads attached.

Now I just needed to fill the empty space around the new focal beads. I bought some glass seed beads in similar shades to the seed beads already on the shoe, and used some Aleene’s Jewel-It glue (specifically designed for permanently sticking gems onto clothing – I happened to have bought an Aleene’s trial size multipack a couple of years ago, and never had a use for this type of glue until now!) to attach them. I put a bead on the tip of a needle, dipped one side into the glue, and used the needle to position the bead. Then I used a pin to keep the bead in place while I removed the needle, and waited for the glue to dry. Easy, if a little fiddly.

Seed beads fill the gaps

I love the finished shoes – well, as much as I could love impractical women’s shoes. No idea how I’ll cope with those little heels; I’ll probably trip up the aisle! Wish me luck!

Shoes: $35. Beads: $7.50. Wearing a pair of shoes I actually like to my sister’s wedding: priceless.

This tutorial is Donationware – the instructions are available for free, but if you like it please consider sending me a donation to show your appreciation:

Send me a donation and receive the easy-to-print PDF version of the tutorial as a thank you! The PDF also includes my tips that I’ve made in the comments since creating this tutorial.

Donations of any size are much appreciated. Just add the amount you wish to donate, and, once you have checked out and paid, your PDF will instantly be available to download from your PlanetJune account.

The complete instructions are available below, regardless of whether or not you choose to pay for them

This is a PlanetJune original tutorial. Please do not share or reproduce this tutorial; instead post a link to http://www.planetjune.com/crinkleball

I’ll answer some questions from the comments on my previous shrinky rings post before I get started, and add more hints and tips throughout the tutorial.

Shrink plastic, for the uninitiated, was originally marketed as a toy for kids. It starts life thin and flexible. You draw on it and then bake it in the oven, and it shrinks to become about 1/3 of the starting size, but 9 times as thick. This thickness makes it strong and hard. It will not bend after baking, so if you try to pull your ring open, or stand on it, it may snap, but it is strong enough to withstand regular use as a ring.

The last step (bending the ring into shape) is the most difficult, so I highly recommend that 1) you read through all the instructions before starting, and 2) practice on a blank piece of shrink plastic so you can get a feel for it and test your size and bending technique before putting too much effort into your design!

Full tutorial instructions are after the jump…

1. Find your shrink plastic

I use Shrinky Dinks Frosted Ruff N’ Ready, which accepts rubber stamped images beautifully. Any transparent shrink plastic will work. If you use the coloured opaque shrink plastic, you would have to decorate the outside of your ring instead of the inside. You could also use the inkjet printable type of shrink plastic.

Note: If you are looking for sources, search for “shrink plastic” (generic term) not “shrinkydinks” (brand name) and you may have more luck. For example, for you UK people, googling ‘Shrink Plastic UK’ (without the quotes) will give you lots of online stores that sell it. You’re looking for large sheets of it, not pre-cut shapes.

2. Measure and cut to size

Note: Different brand of shrink plastic may shrink by different amounts, so you might want to try baking a plain test piece to make sure you’ve got the size right before spending time on decoration.

If you know your ring size, you can use a ring size converter to calculate the desired circumference of your ring. The circumference in this case will be equal to the length of your strip of plastic (after shrinking). Shrinkydinks shrinks by approx 3 times, but I found I had to allow an extra 10% in the length measurement to compensate for the curvature in the finished ring. For my rings (finished size approximately US 6, UK J, and 6mm tall) my starting dimensions are 14.2 x 1.6cm.

To cut the plastic, I like to use a guillotine (paper cutter) to get straight lines, but it’s probably not good for the cutter blade (I use an old cutter blade). You could also use an xacto knife and metal ruler, or just cut the plastic with scissors.

The corners can be very sharp, so I like to round them off slightly with scissors before baking (don’t worry if you forget this step; you can file or sand them down after baking).

3. Decorate shrink plastic

Follow the decorating instructions that come with your shrink plastic. Here are some ideas:

• Rubber stamps + alcohol-based permanent inks (be warned: other types of stamp ink will smudge)
• Fine-point permanent marker (e.g. Sharpie) to draw or trace your designs
• Coloured pencils (use in combination with the above to add colour)
• Print designs directly onto your plastic (inkjet shrink plastic ONLY)

If you’re using the frosted type, remember to decorate the rough (frosted) side.

I used peg stamps to decorate my first rings. The designs are only 1cm tall so fit my rings perfectly. Below I have also tried some other rubber stamps:

Don’t forget to let your ink dry before adding any coloured pencil embellishments, and remember that colours will become more saturated and vibrant after baking, so less is more in this case.

4. Find a suitable form to bend plastic around

Here’s a useful tip to find an object of the right size to create your ring: take an existing ring, and try to slip it over various thin cylindrical household objects, e.g. marker pen barrel, wooden spoon handle, lip balm tube. You are looking for an object that is a tight fit inside your ring. If you don’t have anything suitable, you could buy a short length of wooden dowel of the right diameter. Your object will come into contact with hot plastic, so don’t use any treasured possessions for this step.

5. Shrink your plastic

This is the fun part!

Preheat a toaster oven or conventional oven to the temperature specified on your packaging. Make sure you are in a well-ventilated area so any fumes don’t build up.

Note: Please read the instructions below all the way to the end before baking your ring – the shaping happens very quickly after baking so you need to be ready…

Place your strip (decorated side up) on a piece of brown paper on an oven tray, and put it in the oven. Keep watching… this is where the magic happens. Your strip will begin to curl up and wiggle about as some parts heat more quickly than others and so begin to shrink more quickly. Don’t worry if it looks like it’s stuck together – in my experience it always flattens out as it continues to shrink. When it has finished shrinking, leave it in the oven for another 30 seconds to heat through evenly.

Here’s an animation of the shrinking process:

6. Shape your ring

When your strip comes out of the oven, you will have to work quickly – you only have about 10 seconds before it has cooled and becomes rigid. Disclaimer: to protect your hands from the hot plastic, you should probably wear a thin glove (for more control) or an oven mitt (for better protection against the heat) but I don’t bother – it is hot, but the plastic doesn’t stay hot for long enough to burn skin.

Remove the brown paper from the oven. Wait for about 2 seconds (so it’s not too hot to touch), then carefully wrap the strip around your forming tool, with your decorated side facing in towards the tool. Hold it in place for a few seconds until it becomes cool and rigid.

I’m not going to lie, this step is tricky. You really do have to work quickly, and not make any mistakes, otherwise you won’t have time to wrap the entire strip around your object before it cools. But don’t lose hope! There is a magic fix for a badly-formed ring like the one below…

Pop your misshapen ring back into the oven on the brown paper, balancing it upright on its curved surface so the join is at the top (as in the picture above). After a minute or so, the plastic will relax back out of its shape, and revert back into a flat strip… I told you this stuff was magic! Let it heat through for about 20-30 seconds, then try to form the ring around your tool again.

Left: unsanded edges; Right: sanded edges

That’s it! You can sand down the edges to give a smoother finish, but this may partially obscure your design. You could also paint the edges after forming for a different effect. For more durability of your design, use a clear coat to carefully varnish the inside of the ring (one coat should be enough).

You can make matching earrings, charm bracelets or necklace pendants – just punch holes for the jewellery findings before shrinking the plastic, and remember that the holes will also shrink, so don’t worry that they will be too large.

Enjoy your new jewellery!

Click for larger version

I hope you enjoyed this tutorial! Please leave me a comment if you did, and consider leaving me a donation. Thanks!

Click for larger version

I really like how they’ve turned out. And there’s also the added bonus of watching the long strips of shrinkydinks wiggle about as they shrink

Would anyone be interested in a tutorial on how to make these? Let me know in the comments… UPDATE: Thanks for all the requests! Here’s the tutorial

I made this prototype ring in just a few minutes, to test the concept. It’s not perfect – I’m very inexperienced with stamping so I didn’t quite get the positioning I wanted, and the length shrunk slightly more than I expected, so the ends of the ring don’t meet on the inside, but I think the idea has promise:

What do you think?

I’ll try to make a better one, and then I’ll give you a close-up of the stamped design once I’ve perfected it…

Click for larger pic

The last time I attempted blanket stitch was well over 20 years ago (now doesn’t that make me sound old! I was a very small child at the time) so I had a little apprehension, but I needn’t have worried. The pattern is very clear and easy to follow, even for a novice like me, especially when supplemented with Alice’s tutorials on how to hand sew felt.

I decided to go with a colour theme – white with blue embellishments – but to try to find subtle variations within the theme for each creature. I also wanted it to be a stash-busting project (i.e. I wouldn’t buy anything new in order to complete it), so the whole thing cost an amazing 28 cents (for 1 sheet of white craft felt).

First up was the starfish. I stitched seed beads (clear with a blue core) onto the front, embroidered a pattern on the underside, and then blanket-stitched them together. I really love the embroidered back, although it does look a bit like a 5-sided snowflake… hey, there’s another craft idea! The starfish took me 2 hours to make.

Next up, the octopus. Wow, cutting out all those legs was a lot of work! For the suckers, I found some blue plastic beads that were once part of an ugly beaded belt that came free with a pair of trousers. I had unpicked the entire belt a few months ago, and now have little piles of red and black wooden beads, and the blue plastic beads, waiting for a use. I figured out a way to sew them on invisibly with transparent nylon thread, which I threaded inside the thickness of the felt between each bead so the thread doesn’t show on the back side either. The eyes were more difficult… I don’t have any sequins or suitable-sized buttons in my colour scheme. Finally, I decided to make a sead bead cluster for each eye and I think it has a nice effect!

Thirdly, the fish. I’m getting the hang of the felt cutting etc by now, and I’m racing through the blanket stitching. My white fins didn’t show up against the white body, so I blanket stitched around them. Again, I had the problem of what to use for the eye, and I didn’t want to do the same thing as I’d used for the octopus, so I came up with a ring of opaque seed beads with one larger blue glass bead in the centre.

And lastly, the jellyfish. I left it to last because I thought it would be the most difficult, but either I was super-experienced by this point (haha), or it was very easy. I made the entire jellyfish (except the trailing floss tentacles) during a 25-minute wait at the US border! I’d made a little kit of the pattern, some felt, embroidery floss and needle, my sewing scissors and a tiny bit of fiberfill stuffing in a zip-lock bag, and put it in my handbag in case I was stuck waiting at the border. While everyone else was complaining about the length of their wait, I was happily cutting and sewing. I was almost annoyed when they called my name. I felt a bit self-conscious of my public crafting at first, but I don’t think anyone even took any notice (although I didn’t look up to check, just in case anyone was laughing at me).

So there you go – the set is complete. I really enjoyed making it. Cutting out the fiddly shapes (why oh why do octopi have to have so many legs?!) and the beading took the longest time. But I was surprised at how much I enjoyed working with the felt and floss. Maybe it’s because I’m a perfectionist freak, but seeing all those little neat stitches take shape made me very happy. I can definitely see myself doing some more work with felt and floss in future.

Click for larger pic

I used a base of translucent Fimo Soft, with snakes of green and blue running through it. I also added dark greeny-blue micro beads (tiny glass beads with no holes) to the rounded beads, which is why they look darker than the others. I had a bit of a surprise when I baked the beads – they darkened and went from greenish blue to a definite green, but that’s okay:

I strung the beads with silver (coloured) spacers and findings. The finished necklace length is 14″ so it’s just longer than a choker and sits around the base of my neck.

Click for full-size version

Thanks Mia for the inspiration to make a necklace! This was a fun quick craft to try.

Autumn has always been my favourite season. My birthday is in October, and I love the colours of autumn. Especially since I moved to Canada, the ‘fall’ colours are something I look forward to every year. I decided to make a bracelet with all my favourite autumn elements, so I’d have a little piece of autumn to keep with me all year round.

I made seven signature beads from FIMO polymer clay: a crisp red apple, a bunch of purple grapes, a deep pink rose, a glossy acorn, a pumpkin, an ear of corn, and a red leaf (for scale, the acorn is exactly 1cm tall).

After baking and varnishing them, I glued a bugle bead through the hole in each polymer clay bead for added strength and to give each bead the same width. I strung them on Stretch Magic bead cord with golden bugle beads to space them out and amber coloured glass beads as accents. Here is the finished bracelet (click to see a bigger version):

UPDATE: Here’s a photo of the bracelet in use!

I whipped these up last night by threading size 15 seed beads (colour: heather mix) onto memory wire rings. I superglued the first and last bead onto the wire and that’s it! Memory wire is great – the resulting rings are adjustable to any size finger.